Charming Soda Bottle Bracelet DIY

charming.soda.bottle.bracelets.101

blank300x231

soda.bottle.bracelets.9aYou won’t believe what these beautiful bracelets are made from.  A plastic soda bottle and some scraps. I could have made about 50 of them they are so quick and easy.  Ahhh… I can see it now.  A whole wardrobe of colorful bracelets to match any outfit. (If this were food my mouth would be watering.)  Its a wonderful way to upcycle those soda bottles. Kids and adults alike will love them!

Want more awesome jewelry ideas? Check out our Pixel Heart Necklace and our Spice Lid Upcycled Locket.  And don’t forget our Good Vibe Necklace!

 

soda.bottle.seriesSupplies Used

bracelet.clasps

I found these are perfect for closing your bracelets though there are a variety of ways you can do that.  The 15 to 16 mm size Crimp works quite well. They are aprox. 5/8″ wide. If you’re making very thin or very thick bracelets adjust as needed as they come in a variety of sizes. I found these items are much cheaper purchased separately. You can get a package of each at craft stores or any department store with a craft area.

 

 

 

Tutorial

Remove the label from your bottle. (It does not have to have all the residue removed for this project.) Cut even strips for your bracelets. I made mine about 1/2″ with some a little smaller and some a little larger.

soda.bottle.bracelets.1

blank

soda.bottle.bracelets.3blank

You can either cut or tear strips of material. I made mine about 1/2″ wide.  Make them a long as possible but you can add pieces easily if you need more .
soda.bottle.bracelets.4blank

There are two ways to attach the material to your bracelet. I found the hot glue method works great. Just put some hot glue on the inner end and attach your fabric. Wrap and secure again at the other end.
soda.bottle.bracelets.5blank
You can also use Mod Podge and coat your bracelet and wrap. I did not find this to be any better than hot gluing however.
soda.bottle.bracelets.2blank

You can wrap the fabric two ways. Flat as shown above or by rolling the fabric as you go as seen below. Both look great.
soda.bottle.bracelets.16blank

Once you’re finished you can trim the ends a little bit if needed and add your pinch crimps on each side.

soda.bottle.bracelets.7blank
I used a hammer to tap mine down firmly.
soda.bottle.bracelets.6blankAttach a jump ring to one side and a lobster clasp to the other side.
soda.bottle.bracelets.8blank
For one of my bracelets I use an awl to punch holes on each side and inserted a string to tie the bracelet together.

blank

soda.bottle.bracelets.9blank

blank

 

24 Comments

  1. Well now, I would have never thought the bracelets were made using a soda bottle from the photo in the Linky. They are so cute!!! I have wrapped fabric around rope and attached ends, but I like your idea as they are lighter weight and easier to attach the clasps.

    Thanks for bringing such a clever idea to The Oh My Heartsie Girls WW this week!

    Have a great week!!

    Karren~Host OMHGWW

    Reply

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.